Wet Sounds SYN-DX6 SYN-DX Series 6-Channel 200W x 4 + 2 x 150W RMS at 2 Ohms, Full Range Class-D Marine Amplifier
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • SYN-DX 6-Channel Full Range Class-D Marine Amplifier
- • 6-Channel amplifier
- • (3) 30A ATO fuses (installed)
- • Wet Sounds badge
- • Owner's Manual
Why Choose Wet Sounds SYN-DX6 Marine Amplifier?
Complete Solution
The Wet Sounds SYN-DX 6 marine amplifier is a high-performance marine amplifier that is designed to provide great audio quality and power for your marine audio system. This amplifier, designed for maritime applications, provides robust performance and durability in harsh marine settings. The SYN-DX 6's maximum power output of 600 watts assures robust and clear music reproduction on your boat or watercraft.
Thermal Overload Protection
The SYN-DX 6 has six channels, letting you power a variety of speakers and subwoofers for a full audio system. It has gain settings that you may use to fine-tune the audio output and fit it to your unique speaker requirements. It has a Class D amplifier design that offers excellent efficiency and low power consumption, making it ideal for naval electrical systems. It is built to survive the harsh sea environment and provide consistent performance.
Packed With Premium Features
This marine amplifier is made of marine-grade materials and has conformal-coated circuit boards for protection against moisture, salt, and UV rays. Furthermore, the SYN-DX 6 includes advanced protective features such as temperature protection, overload protection, and short circuit protection, which ensure the amplifier stays safe and functioning even under extreme situations.
Frequently Asked Questions (FAQ)
- • Why won't the amplifier turn on?
Check the fuse, power cable, ground connection, remote turn-on wire, and battery voltage. A loose connection or insufficient voltage can prevent the amplifier from powering on.
- • Why does the amplifier enter protection mode?
Check for shorted speaker wires, incorrect impedance, overheating, or poor connections. Disconnect the speakers and inspect the wiring before reconnecting and testing the system.
- • Why does the amplifier shut off at high volume?
Check battery voltage, speaker impedance, gain settings, and ventilation. Excessive demand or insufficient airflow can trigger protection. Reduce the volume and verify the electrical system.
- • Why is there no sound from some channels?
Check RCA connections, speaker wiring, source settings, and channel controls. Swap inputs or speakers between channels to determine whether the issue comes from the amplifier or wiring.
- • Why does the audio sound distorted?
Check the gain, source level, and equalizer settings. Excessive gain can cause clipping. Lower the gain and adjust the source volume until playback sounds clean.
- • Why does the amplifier get very hot?
Some heat is normal, but excessive temperature can indicate inadequate ventilation, heavy loading, or prolonged high output. Provide airflow and verify the connected speaker impedance.
- • Why is one side of the system louder?
Check the balance settings, RCA cables, speaker wiring, and amplifier channels. A loose connection or incorrect gain adjustment can cause uneven output between the channels.
- • Why do I hear noise through the speakers?
Check the ground connection, RCA cables, and cable routing. Keep signal cables away from power wiring and inspect connections for looseness or electrical interference.
- • Can it power multiple marine speakers?
Yes. Its six-channel design allows multiple speakers to be powered from one amplifier. Confirm each channel's impedance and power requirements before connecting additional speakers.
- • Why does the sound cut out intermittently?
Inspect power, ground, RCA, and speaker connections for looseness. Also check for overheating or voltage drops, which can cause temporary interruptions during demanding playback.
