Wet Sounds SYN-DX-2 SYN-DX Series 2-Channel 375W RMS x 2 at 2 Ohms, Full Range Class-D Marine Amplifier
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • SYN-DX Series 2-Channel Full Range Class-D Marine Amplifier
- • (4) 20A ATO fuses (installed)
- • Wet Sounds badge
- • Owner's Manual
Why Choose Wet Sounds SYN-DX2 Marine Amplifier?
Complete Solution
The Wet Sounds SYN-DX-2 is a small yet strong marine amplifier that produces excellent audio in a maritime environment. This amplifier is specifically designed to resist the rigors of boating while also providing dependable and high-quality sound reproduction. The SYN-DX-2, with a maximum power output of 750 watts, offers powerful and clear music playback on your boat or watercraft.
Thermal Overload Protection
It has a Class D amplifier design that provides excellent efficiency and low power consumption, making it ideal for naval electrical systems. The SYN-DX-2 has two channels that can be used to power a pair of speakers or bridged to drive a subwoofer. It has gain settings that let you to fine-tune the audio output based on your tastes and speaker requirements.
Packed With Premium Features
This marine amplifier is made of marine-grade materials and has conformal-coated circuit boards to protect it from moisture, salt, and UV exposure. Its tough design provides longevity and dependability in the hostile sea environment. Furthermore, the SYN-DX-2 includes advanced protective features like thermal protection and short circuit protection, which protect it from any harm and provide reliable operation on your boat or watercraft.
Frequently Asked Questions (FAQ)
- • What should I check if the amplifier will not turn on?
Check battery voltage, the main fuse, ground connection, and remote turn-on wire. Make sure all power terminals are tight and free from corrosion.
- • How should I set the gain for my speakers?
Start with the gain low and gradually increase it until reaching the desired level. Reduce it if you hear distortion or clipping at higher volumes.
- • What speaker impedance is recommended?
Use speakers that match the amplifier's supported impedance range. Check the specifications before connecting multiple speakers to prevent excessive load and protection-mode activation.
- • Why does it enter protection mode?
Overheating, shorted speaker wires, low impedance, or voltage problems can trigger protection. Check wiring and connections, then allow the amplifier to cool before restarting.
- • How can I reduce unwanted engine noise?
Check the amplifier ground and RCA connections. Keep signal cables separated from power wiring to reduce electrical interference and unwanted noise.
- • What crossover setting should I use?
Choose the filter according to the connected speakers and system design. A high-pass setting can reduce excessive bass from smaller full-range speakers.
- • Why does the amplifier get hot?
Some heat is normal during operation. Ensure adequate ventilation and check speaker impedance, wiring, and gain settings if temperatures become excessive.
- • Is it suitable for marine installations?
Yes. It is designed for marine audio applications. Install it securely and protect electrical connections from excessive moisture, water exposure, and corrosion.
- • What should I check when there is no audio?
Check the source, RCA cables, speaker wiring, gain controls, and power connections. Confirm the amplifier receives an input signal and the speakers operate correctly.
- • Why does the sound cut out at high volume?
Check for overheating, voltage drops, low impedance, or clipping. Insufficient electrical power can also cause the amplifier to shut down temporarily.
