Wet Sounds STEALTH AS-10 10" Stealth Series 10" Sealed Marine Subwoofer Enclosure with Built-In 500W Class-D Amplifier
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" Stealth Series Sealed Marine Subwoofer Enclosure
- • 10" Powered Sub with grille installed (attached 5' power/signal cable)
- • Wired remote level control (attached 16' cable)
- • (2) 30A fuses (one installed)
- • (6) Large phillips-head screws
- • (2) Small phillips-head screws
- • (6) Large washers
- • (2) Small washers
- • "Break-In Procedure" note
- • Owner's Manual
Why Choose Wet Sounds STEALTH AS-10 Enclosed Car Subwoofer?
Conquer the Outdoors with Thunderous Bass
Experience unmatched low-end power wherever your adventure takes you! With a rugged, weatherproof Polyethylene enclosure and a built-in 500W Class-D amplifier, this all-in-one bass solution delivers clean, booming sound that stands up to trails, waves, and off-road excitement.
Feel Every Beat on the Water and Trail
Unleash deep, powerful bass with the high-excursion 10" woofer, engineered to deliver full, impactful sound in any open-air powersports or marine adventure. Enjoy effortless setup with plug-and-play compatibility and auto turn-on technology that powers your system the moment you start your ride.
Precision Bass, Built for Every Ride
Take full control of your audio with user-friendly rear-panel tuning, including gain, low-pass filter, bass boost, and phase adjustments to craft the perfect sound. Protected by a durable, corrosion-resistant aluminum grille and paired with a wired remote for on-the-fly bass control, this subwoofer delivers powerful, optimized performance no matter where you place it in your vehicle or boat.
Frequently Asked Questions (FAQ)
- • Why is there no bass after installation?
Check the power, ground, signal connections, gain settings, and fuse. Confirm the source is sending a subwoofer signal and the enclosure receives adequate power.
- • Why does the bass sound distorted?
Check the gain, source volume, and bass boost settings. Excessive levels can cause clipping. Lower the gain and adjust the source volume for cleaner bass.
- • Why does the subwoofer shut off at high volume?
Check power connections, battery voltage, gain settings, and amplifier temperature. Excessive load or voltage drops can trigger protection during demanding playback.
- • Why is the bass weaker than expected?
Check polarity, crossover settings, placement, and gain. Incorrect phase or filtering can reduce bass output. Adjust the crossover and verify both speaker connections.
- • Why does the enclosure rattle during heavy bass?
Check mounting hardware, enclosure panels, and surrounding trim. Loose components can create unwanted vibrations. Secure the enclosure firmly and inspect nearby panels for rattles.
- • Why is there a humming or buzzing noise?
Check the ground connection, signal cables, and power wiring. Keep signal cables away from power cables and ensure all connections are secure.
- • Can it be installed in a vehicle with limited space?
Yes. Its enclosed design provides a compact subwoofer solution. Measure your available area first and allow enough clearance for wiring, ventilation, and secure mounting.
- • Why does the bass sound muddy?
Check the crossover frequency, bass boost, gain, and enclosure placement. Excessive low-frequency boost can make bass sound boomy. Reduce boost and adjust the crossover.
- • Why does the bass cut out intermittently?
Inspect power, ground, signal, and remote connections for looseness. Also check for overheating or voltage drops that may cause the system to enter protection.
- • Does it require a separate amplifier?
Check the specific enclosure configuration before installation. If the unit is passive, a compatible amplifier is required. Match amplifier power and impedance appropriately.
