Wet Sounds STEALTH-6 ULTRA-HD-W Stealth Series 200W RMS (400W Peak Power) Bluetooth Enabled ATV Sound Bar with Built-In Class D Amplifier - White
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Stealth Series Built-In Class D Amplifier
- • Amplified soundbar speaker (attached 12' power/ground harness with in-line 15A fuse)
- • RF remote control
- • Steering wheel bracket
- • (2) L-brackets
- • (2) Hex-head bolts
- • (2) Pan-head bolts
- • (2) T-bolts
- • (4) Hex-nuts
- • (6) Lock-washers
- • (4) Large flat-washers
- • (6) Small flat-washers
- • (2) Collars
- • (2) Spacers
- • (6) Wire-ties
- • Wet Sounds logo sticker
- • Owner's Manual
Why Choose Wet Sounds STEALTH-6 ULTRA HD-W Sound Bar?
Concert Quality Trail Sound
Packed with a high-efficiency 200W RMS (400W Peak) Class D amplifier driving four 3-inch full-range marine speakers and dual 1-inch titanium tweeters, this setup delivers roaring volume with crystal-clear high notes across a 40 Hz to 20,000 Hz frequency response. Featuring re-tuned Digital Signal Processing and advanced D-Bass Tech, it generates surprisingly rich low-end bass output without needing a bulky external woofer.
Tough Weatherproof Control
Built to withstand brutal weather and harsh off-road trails, this white powder-coated sound bar comes completely sealed with a fully jacketed waterproof wiring harness. Streams flow seamlessly via the integrated Bluetooth receiver, or you can plug in through the auxiliary port. The system includes a backlit control panel, an auto-shutoff timer that powers down after 10 minutes of inactivity to safeguard your battery, a 2V line-output for expanding your setup, and an RF remote control with a convenient steering wheel mount for quick adjustments on the go.
Frequently Asked Questions (FAQ)
- • How do I pair my phone with the sound bar?
Enable Bluetooth on your phone and select the sound bar from the available devices list. Keep your device nearby and ensure it is not connected elsewhere.
- • What should I check if Bluetooth will not connect?
Restart Bluetooth on your device and confirm the sound bar has power. Remove old pairings if needed, then try connecting again from a closer distance.
- • Why does the audio cut out while riding?
Check Bluetooth range, power connections, and wiring. Excessive distance, interference, vibration, or loose electrical connections can cause intermittent audio during operation.
- • How can I improve the Bluetooth connection?
Keep your phone close to the sound bar and reduce interference from nearby wireless devices. Restarting both devices may also resolve connection problems.
- • Can I connect the sound bar to an external amplifier?
Check the available audio outputs and your amplifier's input requirements before connecting additional equipment. Follow the recommended wiring configuration to avoid damaging components.
- • What should I inspect if there is no sound?
Check the power supply, Bluetooth connection, source volume, audio settings, and wiring. Confirm the selected source is playing and the system is not muted.
- • Why does the sound become distorted at high volume?
Lower the source volume and check audio settings. Excessive volume, clipping, or an improperly adjusted signal can cause distortion and reduced sound quality.
- • Is the sound bar suitable for off-road vehicles?
Yes. Its rugged design is intended for powersports and off-road applications. Mount it securely and protect all wiring from excessive vibration and physical damage.
- • How can I prevent the sound bar from vibrating loose?
Use the correct mounting hardware and periodically check all fasteners. Off-road vibration can loosen hardware over time if connections are not properly secured.
- • What should I do if the unit stops working suddenly?
Check the fuse, power and ground connections, and wiring for damage. If power is present, restart the unit and inspect all connections carefully.
