Wet Sounds REVO 6-XS-B-SS REVO XS Series 6.5" 100W RMS (200W Peak Power Handling) 4 Ohms, 2-Way Coaxial Marine Speakers with XS-Black-Stainless Steel RGB Grilles (Pair)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 6.5" REVO XS Series 2-Way Coaxial Marine Speakers
- • (2) 2-way marine speakers with attached grilles
- • (2) Rubber mounting gaskets
- • (2) 8" Waterproof 2-pin female SuperSeal speaker harnesses
- • (2) 8" Waterproof 4-pin female SuperSeal LED (RGB) harnesses
- • (8) 1-1/4" Stainless steel Phillips head screws
- • (2) Templates
- • Owner's Manual
Why Choose Wet Sounds REVO 6 XS-B-SS V3 Marine Speakers?
Marine Audio, Redefined
The REVO V3 6.5" coaxial speakers deliver high-performance, full-range sound designed specifically for marine environments, thanks to their 2-way driver design. Built to last, the 6.5" Kevlar-style composite woofer with Santoprene™ surround and Conex™ spider provides deep, punchy bass, while the 1" titanium dome tweeter ensures crisp highs and protects against water intrusion for reliable, long-lasting performance.
Light Up the Water with Style and Durability
The REVO V3 6.5" features an RGB backlit tweeter, allowing endless customizable color combinations with an optional RGB controller to match your boat or powersports setup. Built with a rugged Nylas™ nylon/fiberglass frame for superior strength and marine-grade durability, it also includes waterproof SuperSeal wiring harnesses for easy, secure, and worry-free installation.
Durable Design, Big Sound on a Budget
These speakers feature fixed, non-removable grilles for maximum protection and a sleek, clean appearance. With 100W RMS (200W peak) power handling and a wide 40Hz–20kHz frequency response, they deliver full-range, high-quality sound from deep lows to crystal-clear highs, making them a budget-friendly choice for marine and off-road audio systems.
Frequently Asked Questions (FAQ)
- • Why is there no sound after installation?
Check the waterproof speaker connector, source unit, amplifier, and volume settings. Before testing, verify the red wire is positive and the black wire is negative.
- • Why isn't the RGB lighting working?
Check the four-wire RGB harness and power connection. Verify the black wire receives 12V and use the required inline fuse before testing the color connections.
- • Why do the speakers sound distorted at higher volume?
Check amplifier gain, source volume, and equalizer settings. Excessive levels can cause clipping and distortion. Lower the gain and volume, then increase them gradually.
- • Why is the bass weaker than expected?
Check speaker polarity, amplifier settings, and crossover configuration. Reversed polarity can cause phase cancellation and reduce bass response, especially with multiple speakers.
- • Why does one speaker sound different from the other?
Check the wiring, amplifier channels, source balance, and speaker connections. A loose connector or incorrect polarity can cause differences in volume or sound quality.
- • Why does the speaker rattle during bass-heavy music?
Check the mounting screws, gasket, grille, and mounting surface. Loose hardware or an uneven surface can create unwanted vibration at higher volumes.
- • Why won't the speaker fit my existing mounting hole?
Verify the required 5-inch cutout and 3.3-inch mounting depth before installation. Use the supplied template to confirm fitment and prevent incorrect cutting.
- • Can the RGB lights be controlled without an RGB controller?
Yes, basic RGB color operation is possible through the wiring connections. For more color options and easier control, use a compatible Wet Sounds RGB controller.
- • Why does the tweeter sound weak or stop working?
Inspect the tweeter connection and wiring behind the grille. If the connection is secure but the tweeter remains inactive, test the speaker before replacement.
- • Can these speakers handle 100 watts continuously?
Yes. Each speaker is rated for 100 watts RMS with a 200-watt peak rating. Use an amplifier matched to the 4-ohm impedance and recommended power range.
